1.Introduction
2.Check Your System

2.1 Check List
2.2 System Requirements
2.3 Distribution Disk Contents
2.4 Backup Your Diskette
2.5 Some Restrictions

3.PC COM Installation

3.1 Device Driver Installation
3.2 Hardware Configuration Specification
3.3 Some Constraints

4.Run Time Support

4.1 How To Use Device
4.2 Communication Parameters Setup
4.3 Setup and Status Report

5.File Transfer

5.1 Transmit File To Remote Site
5.2 Receive Data From Remote Site
5.3 Two Way Communication

6.Programming Technical Under MS DOS

6.1 How To Use Device Driver
6.2 PCCOM Library
6.3 Examples
6.4 I/O Control Via Software Interrupt
6.5 PCCOM DOS IOCTL Functions

7.Diagnostic Program

7.1 TESTCOM Diagnostic Program

APPENDIX A - Virtual Terminal

APPENDIX B - Communication Parameters

APPENDIX C - Syntax Specification Of Hardware Configuration

APPENDIX D - Multi-Serial Products

APPENDIX E - Warranty Information