A) Decision PCCOM 2 Port RS232

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the
menu select [X] by pressing "x" or you may use the
arrow keys until you reach there.
3) Click 0 to configure it.
4) Go to the "Number of Ports: " and enter 2
5) Go to the "Number of Ports per IRQ group:" and enter 2
then press the "ESC" button to return to main menu.
6) If you want to change some option select the corresponding
number on the menu located at the right side.
7) Press enter to start testing.

B) Decision PCCOM 2 Port RS422

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [Y] by pressing "y" or you may use the arrow keys
until you reach there.
3) Click 0 to configure it.
4) Go to the "Number of Ports: " and enter 2
5) Go to the "Number of Ports per IRQ group:" and enter 2 then
6) If you want to change some option select the corresponding
number on the menu located at the right side.
7) Press enter to start testing.

C) Decision PCCOM 2 Port RS485

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [Z] by pressing "z" or you may use the arrow keys until
you reach there.
3) Click 0 to configure it.
4) Go to the "Number of Ports: " and enter 2
5) Go to the "Number of Ports per IRQ group:" and enter 2 then
press the "ESC" button to return to main menu.
6) If you want to change some option select the corresponding
number on the menu located at the right side.
7) Press enter to start testing.

Test PCCOM PCI 4 Port Card

A) Decision PCCOM 4 Port RS232

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [X] by pressing "x" or you may use the arrow keys
until you reach there.
3) If you want to change some option select the corresponding
number on the menu located at the right side.
4) Press enter to start testing.

B) Decision PCCOM 4 Port RS422

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [Y] by pressing "y"or you may use the arrow keys
until you reach there.
3) If you want to change some option select the corresponding
number on the menu located at the right side.
4) Press enter to start testing.

C) Decision PCCOM 4 Port RS485

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the
menu select [Z] by pressing "z" or you may use the arrow
keys until you reach there.
3) If you want to change some option select the
corresponding number on the menu located at the right
4) Press enter to start testing.

Test PCCOM PCI 8 Port Card

A) Decision PCCOM 8 Port RS232

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [V] by pressing "v" or you may use the arrow keys
until you reach there.
3) If you want to change some option select the corresponding
number on the menu located at the right side.
4) Press enter to start testing.

B) Decision PCCOM 8 Port RS422

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [W] by pressing "w"or you may use the arrow keys
until you reach there.
3) If you want to change some option select the corresponding
number on the menu located at the right side.
4) Press enter to start testing.

C) Decision PCCOM 8 Port RS485

1) At the prompt run PCCOMQC.EXE
2) When you run the program you will see the menu, at the menu
select [[] by pressing "[" or you may use the arrow keys
until you reach there.
3) If you want to change some option select the corresponding
number on the menu located at the right side.
4) Press enter to start testing.