Installing
the 8-PORT PCI PCCOM at Windows 2000 (V2.11)
|
|
|
1.
|
Run the Setup program.
If you have the old driver installed on your computer remove it first
before running the Setup program of the latest driver.
|
|
|
|
 |
|
| |
2.
|
To see if you
have the latest driver, Go to the control panel then open the
"Decision PCCOM Adapters". At the "Device Details" frame
you will see the "PCCOM Device Driver Configuration
V2.11". If you do not have the latest driver Please
request for the latest version.
|
|
|
|
 |
|
|
3.
|
Shut down your PC and
insert the PCCOM Card. Turn on your PC.
|
|
|
|
 |
Please note that PCI
cards will be auto detected when being installed into your computer.
You have to configure ISA-based cards manually using the configuration
utility applied.
|
|
Installing
PCCOM PCI Card at Windows 2000
|
|
|
1.
|
Installing PCCOM PCI
Card will display the "Found New Hardware" dialog box and
will run the "Found New Hardware Wizard" At Found New Hardware
Wizard Next button.
|
|
|
|
 |
|
 |
|
|
2.
|
At the What do you
want the wizard to do, select "Display a list of the known driver"
|
|
|
|
 |
|
|
3.
|
At the Hardware Type,
select Multi-port serial adapters then click the Next button
|
|
|
|
 |
|
|
4.
|
At the Manufacturers:
select Decision Computer Int'l and at the Models: select the PCCOM
8 Port then click the Next button.
|
|
|
|
 |
|
|
5.
|
At the Update Driver
Warning click the "Yes" button.
|
|
|
|
 |
|
|
6.
|
At the Start
Device Driver Installation click the "Next" button.
|
|
|
|
 |
|
|
7.
|
When the dialog "Digital
Signature Not Found" click the "Yes" button
|
|
|
|
 |
|
|
8.
|
At the "Completing
the Found new Hardware Wizard" click the "Finish" button.
|
|
|
|
|
9.
|
To configure the card go
to the control panel then open the "Decision PCCOM
Adapters".
|
|
|
|
|
Further
information, please run the Decision PCCOM Control Panel
applet, check the manual or contact your local distributor.
|
|
A.)
Note: PCCOM PCI 2 Port / 4 Port / 8 Port on Windows 2000
|
|
After
the driver installation, you will notice that the port are
not visible on the Device Manager, this is normal, and the
card will still work
|
|
 |
|
B.
Conflicts
|
|
As
you can see on �PCCOM 4 Port Properties?on the
�Conflicting device list?box that there is a conflict.
Don�t mind about the conflict, the card installed will
still work. We are resolving this problem as soon as possible.
|
|
 |