CHAPTER 4
HARDWARE INSTALLATION

Your PCCOM PCI bus 8 port adapter is designed to be inserted in any available PCI slot in your Pentium or compatibles. You must plug this board to your computer before installing PCCOM software. In order to gain access to the expansion slots, follow the steps listed below:

	Turn off all power to your computer and all peripheral devices before installing your PCCOM PCI bus 8 port adapter.
	Remove the cover of the computer.
	Insert the PCCOM PCI bus 8 port adapter into any available PCI slot. Make sure the adapter is firmly seated in the chosen slot.
	Replace the cover of the computer.
	Connect cables to D25 or DB9 connectors as required.
	Connect cables to D25 or DB9 connectors as required.