APPENDIX F
WINDOWS/NT CONFIGURATION V3.5 up
Welcome
to the Decision PCCOM PCI cards series.
This series enables you to utilize the built in plug and play
functionality of Windows NT, combined with the power of PCI
based serial communication.
F.1 Installation
- For
optimum PnP functionality, please install one card at a time.
- Unplug your PC, open it and
install one Decision PCCOM PCI card.
- Start your computer and wait
until Windows NT is loaded.
- Insert the device driver CD into
your computer. The CD is auto run, so you just wait until
Decision Studio Applet appears.
- Click ˇ§Device Driveˇ¨ button,
ˇ§Windows Operating Systemˇ¨ then a selection of windows
operating system platform appears.
- Click ˇ§Windows NTˇ¨ |button to
view the device list of different hardware products.
- Select ˇ§PCCOM Multi Port Serial
Cardˇ¨. Install Shield will do installation, for you just
click ˇ§Nextˇ¨ When windows prompts you to resume
installation procedure.
- To configure, go to [Control
Panel]\[Decision PCCOM Adapters]. Click the ˇ§+ˇ¨ of the card
you want configure, then select which COM port you want to
set.
|