CHAPTER
4
HARDWARE
INSTALLATION
Your PCCOM PCI bus 4 port adapter is designed to
be inserted in any available PCI slot in your Pentium or
compatibles. You must plug this board to your computer before
installing PCCOM software. In order to gain access to the
expansion slots, follow the steps listed below:
- Turn off all power to
your computer and all peripheral devices before installing Your
PCCOM PCI bus 4 port adapter.
- Remove the cover of the
computer.
- Insert the PCCOM PCI bus 4 port adapter into any
available PCI slot. Make sure the adapter is firmly seated
in the chosen slot.
- Replace
the cover of the computer.
- Connect cables to D25 or DB9 connectors as required.
- Turn
on the power of your computer.
|