APPENDIX F
WINDOWS/NT CONFIGURATION V3.5 up
Welcome
to the Decision PCCOM PCI cards series. This series enables you to
utilize the built in plug and play functionality of Windows NT,
combined with the power of PCI based serial communication.
F.1 Installation
- For optimum PnP
functionality, please install one card at a time.
- Unplug your PC, open it and
install one Decision PCCOM PCI card.
- Start your computer and wait
until Windows NT is loaded.
- Insert the device driver CD
into your computer. The CD is auto run, so you just wait until Decision
Studio Applet appears.
- Click ˇ§Device Driveˇ¨ button,
ˇ§Windows Operating Systemˇ¨ then a selection of windows operating system
platform appears.
- Click ˇ§Windows NTˇ¨ |button
to view the device list of different hardware products.
- Select ˇ§PCCOM Multi Port
Serial Cardˇ¨. Install Shield will do installation, for you just click
ˇ§Nextˇ¨ When windows prompts you to resume installation procedure.
- To configure, go to [Control
Panel]\[Decision PCCOM Adapters]. Click the ˇ§+ˇ¨ of the card you want
configure, then select which COM port you want to set.
F.2 Remove Ports
Go to [Control Panel]\[Ports] then select what you want to remove and
click ˇ§Deleteˇ¨ to remove ports.
F.3 Uninstall
Enter [Control Panel]\[Decision
PCCOM Adapter], and click [Completely Remove Driver].
|