APPENDIX F
WINDOWS/NT CONFIGURATION V3.5 up
Welcome
to the Decision PCCOM PCI cards series. This series enables you to
utilize the built in plug and play functionality of Windows NT,
combined with the power of PCI based serial communication.
F.1 Installation
- For optimum PnP
functionality, please install one card at a time.
- Unplug your PC, open it and install one
Decision PCCOM PCI card.
- Start your computer and wait until
Windows NT is loaded.
- Insert the device driver CD into your
computer. The CD is auto run, so you just wait until Decision Studio
Applet appears.
- Click ˇ§Device Driveˇ¨ button, ˇ§Windows
Operating Systemˇ¨ then a selection of windows operating system platform
appears.
- Click ˇ§Windows NTˇ¨ |button to view the
device list of different hardware products.
- Select ˇ§PCCOM Multi Port Serial Cardˇ¨.
Install Shield will do installation, for you just click ˇ§Nextˇ¨ When
windows prompts you to resume installation procedure.
- To configure, go to [Control
Panel]\[Decision PCCOM Adapters]. Click the ˇ§+ˇ¨ of the card you want
configure, then select which COM port you want to set.
|