|
APPENDIX F
WINDOWS/NT
CONFIGURATION
V3.5 up
Welcome
to the Decision PCCOM PCI cards series.
This series enables you to utilize the built in plug and play
functionality of Windows NT, combined with the power of PCI
based serial communication.
F.1 Installation
- For optimum PnP
functionality, please install one card at a time.
- Unplug your PC,
open it and install one Decision PCCOM PCI card.
- Start your
computer and wait until Windows NT is loaded.
- Insert the device
driver CD into your computer. The CD is auto run, so you
just wait until Decision Studio Applet appears.
- Click ˇ§Device
Driveˇ¨ button, ˇ§Windows Operating Systemˇ¨ then a selection
of windows operating system platform appears.
- Click
ˇ§Windows NTˇ¨ |button to view the device list of different
hardware products.
- Select
ˇ§PCCOM Multi Port Serial Cardˇ¨. Install Shield will do
installation, for you just click ˇ§Nextˇ¨ When windows prompts you to
resume installation procedure.
- To configure, go
to [Control Panel]\[Decision PCCOM Adapters]. Click the
ˇ§+ˇ¨ of the card you want configure, then select which COM port you want
to set.
F.2 Remove Ports
Go
to [Control Panel]\[Ports] then select what you want to remove and
click ˇ§Deleteˇ¨ to remove ports.
F.3 Uninstall
Enter
[Control Panel]\[Decision PCCOM Adapter], and click
[Completely Remove Driver].
|
