|
CHAPTER
4
HARDWARE
INSTALLATION
Your
PCCOM PCI bus 2 port adapter is designed to be inserted in any
available PCI slot in your Pentium or compatibles. You must
plug this board to your computer before installing PCCOM software. In
order to gain access to the expansion slots, follow the steps listed
below :
1.
|
Turn off all power to your computer and all peripheral
devices before installing your PCCOM PCI bus
2 port adapter. |
| 2. |
Remove the cover of the computer. |
| 3. |
Insert the PCCOM PCI bus 2 port adapter into any
available PCI slot. Make sure the adapter is firmly seated in the
chosen
slot. |
| 4. |
Replace the cover of the computer. |
| 5. |
Connect cables to DB9 connectors as required. |
| 6. |
Turn on the power of your computer. |
|
