|
CHAPTER
4
HARDWARE
INSTALLATION
Your
PCCOM PCI bus 2 port hybrid adapter is designed to be inserted in any
available PCI slot in your Pentium or compatibles. You must plug this
board to your computer before installing PCCOM software. In order to
gain access to the expansion slots, follow the steps listed below:
1.
|
Turn off all power to your computer and all peripheral devices before installing your PCCOM PCI bus 2 port hybrid adapter. |
| 2. |
Remove the cover of the computer. |
| 3. |
Set the SW1 to identify card number. |
4.
|
Insert
the PCCOM PCI bus 2 port hybrid adapter into any available PCI slot.
Make sure the adapter is firmly seated in the chosen slot. |
| 5. |
Replace the cover of the computer. |
| 6. |
Connect cables to D25 or DB9 connectors as required. |
7.
|
Turn on the power of your computer. |
|
