CHAPTER 4
HARDWARE INSTALLATION
Your PCCOM RS422/RS485 adapter
is designed to be inserted in any available slot in your PC/XT, PC/AT,
PC/386 or compatibles. In order to gain access to the expansion slots,
follow the steps listed below:
| 1. |
Turn off all power to your computer and all peripheral devices before installing your PCCOM RS422/RS485 adapter. |
| 2. |
Remove the cover of the computer. |
| 3. |
Insert the pre-configured PCCOM RS422/RS485 adapter into any available slot. Make sure the adapter is firmly seated in the chosen slot. |
| 4. |
Replace the cover of the computer. |
| 5. |
Connect cables to D25 connectors as required. |
