CHAPTER 4
HARDWARE INSTALLATION
Your PCCOM ISA bus 2 port
RS422/RS485 adapter is designed to be inserted in any available slot in
your PC/AT, PC/386, PC/486, Pentium or compatibles. In order to gain
access to the expansion slots, follow the steps listed below:
| 1. |
Turn off all power to your computer and all peripheral devices before installing your PCCOM ISA bus 2 port RS422/RS485 adapter. |
| 2. |
Remove the cover of the computer. |
| 3. |
Insert the pre-configured PCCOM ISA bus 2 port adapter into any available slot. Make sure the adapter is firmly seated in the chosen slot. |
| 4. |
Replace the cover of the computer. |
| 5. |
Connect cables to D9 connectors as required. |
