CHAPTER 4
HARDWARE INSTALLATION


Your PCCOM ISA bus 2 port adapter is designed to be inserted in any available slot in your PC/AT, PC/386, PC/486, Pentium or compatibles. In order to gain access to the expansion slots, follow the steps listed below:

1.
 Turn off all power to your computer and all peripheral devices before installing your PCCOM ISA bus 2 port adapter.
2.
 Remove the cover of the computer.
3.
 Insert the pre-configured PCCOM ISA bus 2 port adapter into any available slot. Make sure the adapter is firmly seated in the chosen slot.
4.
 Replace the cover of the computer.
5.
 Connect cables to D9 connectors as required.