APPENDIX  D     MULTI-SERIAL PRODUCTS
PCCOM software is a powerful device driver, which can be link to any hardware that provides serial port. In this appendix, we will introduce how to setup PCCOM software when use our products. We note that all examples are default setting that satisfy origin factory setting, however you may set different hardware configuration if you need.

D.1 PCCOM 4 port card
      PCCOM ISA bus 4 port card
      SafLine 4 port card
Four serial adapter provides four serial ports, the origin factory setting are shown in the following.
port 1 address 2A0
port 2 address 2A8
port 3 address 2B0
port 4 address 2B8
interrupt vector address 2BF
interrupt active status low
interrupt IRQ5
modem control register RTS+DTR

To setup four serial adapter, the commands are shown in the PCCOM4.OPT file.

/B:2
/D:COM3
/A:[5:
       2A0,4,2BF,LO:
           (2k:9600:N-8-1:RTS+DTR:XON) * 4]
Back
D.2 Eight Serial Adapter
Eight serial adapter provides eight serial ports, the origin factory setting are shown in the following.
port 1 address 2A0
port 2 address 2A8
port 3 address 2B0
port 4 address 2B8
interrupt vector address 2BF
interrupt active status low
interrupt IRQ5
port 5 address 1A0
port 6 address
 1A8
port 7 address 1B0
port 8 address 1B8
interrupt vector address
 1BF
interrupt active status
 low
interrupt
 IRQ7
modem control register
 RTS+DTR

To setup eight serial adapter, the commands are shown in the 8PORT.OPT file.

/B:2
/D:COM3
/A:[5:
       2A0,4,2BF,LO:
           (2k:9600:N-8-1:RTS+DTR:XON) * 4],
   [7:
       1A0,4,1BF,LO:
           (2k:9600:N-8-1:RTS+DTR:XON) * 4]
Back
D.3 Dual Eight Serial Adapter
Dual eight serial adapter provides eight serial ports, the origin factory setting are shown in the following.
port 1 address 290
port 2 address 298
port 3 address 2A0
port 4 address 2A8
port 5 address 2B0
port 6 address 2B8
port 7 address 2C0
port 8 address 2C8
interrupt vector address 2D0
interrupt active status high
interrupt IRQ4
modem control register RTS+DTR

To setup dual eight serial adapter, the commands are shown in the DUAL8.OPT file.

/B:2
/D:COM3
/A:[4:
       290,8,2D0,HI:
           (2k:9600:N-8-1:RTS+DTR:XON) * 8]
Back
D.4 PCCOM 8 port card
      PCCOM ISA bus 8 port card
      SafLine 8 port card
Super Eight serial adapter provides eight serial ports, the origin factory setting are shown in the following.
port 1 address 280
port 2 address 288
port 3 address 290
port 4 address 298
port 5 address 2A0
port 6 address 2A8
port 7 address 2B0
port 8 address 2B8
interrupt vector address 2C2
interrupt active status low
interrupt IRQ4
modem control register RTS+DTR

To setup super eight serial adapter, the commands are shown in the PCCOM8.OPT file.

/B:2
/D:COM3
/A:[4:
       280,8,2C2,LO:
           (2k:9600:N-8-1:RTS+DTR:XON) * 8]
Back
D.5 Standard COM1 and COM2
The interrupt setting and port address of standard COM1 and COM2 are shown in the following.
COM1 address 3F8
COM2 address 2F8
interrupt for COM1 IRQ4
interrupt for COM2 IRQ3
modem control register RTS+DTR+OUT2

To setup COM1 and COM2, the commands are shown in the COM1COM2.OPT file.

/B:0
/D:COM1
/A:[4:
       3F8,1,0,LO:
          (8k:9600:N-8-1:RTS+DTR+OUT2:XON)],
   [3:
       2F8,1,0,LO:
          (8k:9600:N-8-1:RTS+DTR+OUT2:XON)]
Back
D.6 SafLine 16 port card
SafLine 16 port card is composed with two PCCOM 8 port cards, you can set it as two PCCOM 8 port cards. The hardware configuration file is shown in the PCCOM16.OPT file.