The PCCOM PCI bus 2 port hybrid adapter is an 32 bits PCI bus board with Plug and Play (PnP) features, it provides two asynchronous serial
communication ports (one is RS232 port, another is RS422 or RS485 port), which link the computer and
serial
peripheral devicessuch
as terminals, modems, serial printers, plotters, ... etc. The PCCOM PCI
bus 2 port hybrid adapter can be used to set different communication
mode (RS422 or RS485) for second port as user requires.
The PCCOM PCI bus 2 port hybrid adapter is particularly suited to
facilitate the connection of terminals (VDUs) in multi-user operating
systems. The PCCOM board may be installed in any Pentium or hardware
compatible systems. The PnP features let hardware configuration for IRQ
and I/O address is detected by BIOS automatically, you don’t need set
switch and jumper.
Since most of the computer has its own COM1 and COM2, the PCCOM PCI bus 2 port hybrid adapter can be configured from COM3.
On board ST16C550 chip provides 16 bytes FIFO buffer for each port.
There are two kinds of mode can be choose, one is normal speed mode
that its baud rate up to 115200, another is quadruple speed mode that
its baud rate up to 460K.
|
|
The features of the PCCOM PCI bus 2 port hybrid adapter are: |
|
32 bit PCI bus with Plug and Play (PnP) features. |
|
One RS232 port and one RS422 or RS485 port for asynchronous communications. |
|
User can set different communication mode (RS422 or RS485) for second port. |
|
Suitable for SCO UNIX, Linux, MS/DOS, WINDOWS NT/2000/XP, WINDOWS 95/98/ME, OS/2... etc. |
|
Pentium hardware compatibles.
|
|
Baud rate up to 115200 for normal speed mode and up to 460K for quadruple speed mode. |
|
Provides 16550 port that contains 16 bytes FIFO for each port. |
|
Up to 4 boards be installed in one computer system. |
|
Software compatible with PCCOM98/2000. |
|
Operating temperature 0 to 60 ºC. |
|
Storage temperature -20 to 70 degree °C. |
|
Humidity 5% to 95% in non-condensing.
|
|
UNPACKING INFORMATION |
|
PCCOM PCI bus 2 port hybrid adapter. |
|
xpansion cable with standard 25 pin connectors or 9 pin connectors. |
|
User Manual |
|
Decision Studio CD for PCCOM software. |
|
Warranty form. |
|
|
|
|
|
|