The PCCOM PCI bus 2
port RS232 with isolator adapter is an 32 bits PCI bus board with Plug
and Play (PnP) features, it provides two asynchronous serial communication ports (RS232), which
link the computer and serial
peripheral devices such as terminals,
modems, serial printers, plotters, ... etc. The on board isolator can
isolate demange voltage up to 2500V r.m.s..
The PCCOM PCI bus 2 port adapter is particularly suited to facilitate
the connection of terminals (VDUs) in multi-user operating systems. The
PCCOM board may be installed in any Pentium or hardware compatible
systems. The PnP features let hardware configuration for IRQ and I/O
address is detected by BIOS automatically, you don’t need set switch
and jumper.
Since most of the computer has its own COM1 and COM2, the PCCOM PCI bus
2 port adapter can be configured from COM4.
On board 16550 chip provides two 16550 functions which contains 16
bytes FIFO buffer for each 16550 ports. There are two kinds of mode can
be choose, one is normal speed mode that its baud rate up to 115200,
another is high speed mode that its baud rate up to 460K. |
|
The features of the PCCOM PCI bus
2 port adapter are: |
|
PACKING INFORMATION |
|
|
|
|