Installation Web Data Acquisition Server
Web DAQ DIY
This install CD is prepare for i810, SiS730s or Geode (Cyrex CS5530A) Main board chipset.
If your main board not in this list; please contact Tranzview technical support team, requisite special customer made install CD.
Install Tranzview Embedded Web Server
Step 0: Prepare Hardware
PC
PCCOM
Serial Communication Card (Optional) Smatelab
Digital Isolator Input and Output card Video
Capture Card(Optional)
AD/DA card
b. Put CD in CD ROM Driver.
tvaudio: found pic16c54 (PV951)
bttv3: i2c attach [client=pic16c54 (PV951),ok]
i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #3](pos.
tuner: probing bt848 #3 i2c adapter [id=0x10005]
i2c-core.o: adapter bt848 #3 registered as adapter 3.
bttv3: registered device video3
bttv3: registered device vbi3
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP:Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 341k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 260k free
root /dev/hdc
BusyBox v0.60.3 (2002.06.20-18:01+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
sh: can't access tty; job control turned off
#Install
Start Installing Tranzview System
***** HardDisk Configuration *****
HardDisk on /dev/hda will now be partitioned.
Step 3: Key in
Do you wish to continue? (yes/no):Yes
Please keyin a number of the first partition size.(MB)
Step 4: Key size of partition, default is 45.
The size needs over 45MB:45
=========== partition list ====================
Device Boot Start End Blocks Id
/dev/hda0 1 46 46336+ 83
/dev/hda1 47 124 78624 83
------------- after rebuilt ------------------
/dev/hda0
boot_ind 0 head 1 sector 1 cyl 0 sys_ind 83
end_head 0 end_sector 1 end_cyl 0
start4 63 size4 92673
/dev/hda1
boot_ind 0 head 0 sector 1 cyl 46 sys_ind 83
end_head 31 end_sector 63 end_cyl 123
start4 92736 size4 157248
-------------------------------------------------
Writing partition table
hda: hda1 hda2
Reload partition table and syncing...
making filesystem for /dev/hda1
mke2fs 1.27 (8-Mar-2002)
making filesystem for /dev/hda2
mke2fs 1.27 (8-Mar-2002)
Please select motherboard Chip.
Step 5: Please select motherboard Chipset.
1. i810: Intel i810 Chipset
http://www.intel.com/design/chipsets/810/
2: SiS730s: SiS730s Chipset
http://www.sis.com/products/chipsets/integrated/socketa/730s.htm
3: Geode(Cyrex CS5530A):
http://www.akumeka.com/embedded/index.html?target=Embedded_SBC.html
1.i810 2:SiS730s 3:Geode(Cyrex CS5530A)
Please select your chipset, Key in 1 or 2 or 3.
./server/classes/
./server/run
./server/runfb
./ttyp0
./var/
./var/lib/
./var/lib/mysql/
./var/lib/mysql/mysql.sock
./var/log/
./var/run/
./var/lock/
./var/lock/subsys/
./var/lock/subsys/mysql
./var/lock/subsys/random
./var/var/
./var/var/proftpd/
./var/var/proftpd/proftpd-183
Added DOM *
rootfs on / type rootfs (rw)
/dev/ram0 on / type ext2 (rw)
/proc on /proc type proc (rw)
/dev/hdc on /mnt type iso9660 (ro)
/dev/hda1 on /mnt/mnt type ext2 (rw)
/dev/hda2 on /mnt/tmp type ext2 (rw)
Step 6: Please enter yes
Do you wish to continue? (yes/no):Yes
Step 7: Completed Tranzview System installed.
Tranzview System has been successfully installed.
The system will shutdown.
The network setting as follows:
IP 192.168.1.47
Gateway 192.168.1.1
Netmask 255.255.255.0
DNS 61.13.26.195
The superuser is "root".
The password is "123456".
#
Step 8: Turn OFF power and turn ON power again, Tranzview will be start.